FAQ: How To Install Cd/radio Under Kitchen Cabinets?

How do I set the clock on my Sony under cabinet radio?

Setting the Clock

  1. Plug in the CD kitchen clock radio. The display will flash “AM 12:00”.
  2. Press CLOCK for a few seconds.
  3. Press TUNE•TIME SET + or – until the correct hour appears in the display.
  4. Press CLOCK once.
  5. Repeat steps 3 and 4 to set the minutes.

How do I set the clock on my Ilive under cabinet radio?


  1. Press and hold the Power/Source button to turn the unit off.
  2. Press the Clock button.
  3. Press the Tun +/- buttons to adjust the hour.
  4. Press the Clock button.
  5. Press the Tun +/- buttons to adjust the minute.
  6. Press the Clock button to finish setting the time.

What is DST on Sony Dream Machine?

“DST” appears on the display and the clock display switches to daylight saving time (summer time). To deactivate the daylight saving time (summer time) adjustment, press and hold DST for more than 3 seconds again.

How do I connect to iLive radio?

Power the unit ON and press the Source button to switch to Bluetooth mode. The Pairing Indicator will begin slowly flashing blue. 2. Press the Pair button.

You might be interested:  FAQ: How To Install Houze Undermount Farmhouse Style Ss Kitchen Sink?

How do you pair iLive radio?

How do I pair my device to this speaker system?

  1. Press the power button to power on the unit.
  2. Using the Source button select Bluetooth. ”
  3. Press and hold the Pair button until the indicator light blinks quickly.
  4. Using the controls on your wireless device search and select “IBC233” in the discovered device menu.

How do I sync my iLive?

Open the iLive Wi-Fi app and press “Add Device”. Press and hold the Pair (WPS) button on the speaker and follow the on-screen prompts to enter the necessary information. 2. The app will display it’s progress as it configures the speaker and your Wi-Fi network.

How do I reset my Sony ICF c1?

1 Press and hold ENTER/TIME SET for more than 2 seconds. You will hear a beep and the last two digits of the year will start to flash on the display. 3 Repeat step 2 to set the month, day and time.

How do I change the time zone on my Sony ICF c1?

For the ICF-CS10IP and ICF-CS10IPBLK, make sure that the TIME ZONE settings are correct.

  1. Press and hold the – TIME ZONE button for at least two seconds until the area number 2 flashes in the display.
  2. Press the TIME SET +/- button repeatedly to select one of the following: NOTES:
  3. Press the – TIME ZONE button to set.

How do I turn off my Sony radio?

To turn off the radio function on this model of clock radio (see the Products section below), press the ALARM RESET/OFF button [FIG. 1] located on the top of the unit. To turn the radio function back on, press the FM button, which can be found on the left side of the ALARM RESET/OFF button.

Leave a Reply

Your email address will not be published. Required fields are marked *


Readers ask: How To Install A Moen Kitchen Faucet With A Sprayer?

Contents1 How do you remove a Moen faucet sprayer hose?2 Do you have to use plumbers putty when installing a new faucet?3 How do you change a Moen sprayer hose?4 Can I use silicone in place of plumbers putty?5 Do I need Teflon tape on faucet supply lines?6 Should you caulk around faucet?7 How do […]

How To Install Kitchen Curtain Rods?

Contents1 Where should curtain rod brackets be placed?2 How far apart should curtain rod brackets be?3 Do curtain rods need studs?4 How high should you hang a curtain rod above the window?5 How much should a curtain pole overhang?6 How wide can a curtain rod be without support?7 How high should a curtain rod be […]