Often asked: How To Install Crown Molding On Top Of Kitchen Cabinets?

Should cabinet crown molding go to the ceiling?

1 ) Never leave crown moldings closer than 9 inches from a ceiling. Once you get within a foot of the ceiling you should have the cabinetry and molding meet ceiling. Don’t create spaces that look odd and that can’t be cleaned.

How do you fill the gap between top of cabinet and ceiling?

You can build the cabinets to the ceiling (most expensive option), keep the area open (no cost!), build a soffit to match the cabinets, or add a drywall soffit.

What is the trim on top of cabinets called?

Crown molding is decorative trim that is added to the top of your cabinets. The benefit of installing crown molding is that it draws the eye upward, showcasing the elegance of your cabinets. Crown molding can either bond with the ceiling or allow for space above the cabinet.

Do upper and lower kitchen cabinets have to line up?

Luckily, there are few rules about cabinet placement. Upper and lower cabinets may align at each end, and they sometimes do. However, aligning every upper and lower cabinet throughout the room is rare. As long as the cabinets are installed securely, almost anything goes.

You might be interested:  FAQ: How Long Does It Normally Take For Men To Install Granite Countertop And Backsplash In A Kitchen?

How much space should be between countertop and upper cabinets?

The standard distance between the top of a kitchen counter and the bottom of the wall cabinets above it is 18 inches. For the average person, this distance is the ideal balance between plenty of space to work on the countertop and the ability to reach all of the shelves in the cabinet.

Are kitchen soffits outdated?

Kitchen soffits are out of style, with fewer people retaining these fixtures in their homes and fewer still having them installed at all. Their outdated look often makes a room look smaller, and when building new kitchens, it’s better to free up that space for a bigger and brighter feel.

Why is there a gap between crown molding and ceiling?

Crown molding ceiling gap happens because the rough lumber behind the drywall shrinks. It can be prevented by nailing the ceiling molding to the ceiling allowing it to float up and down on the wall.

How do you fix a gap between ceiling and crown molding?

You can minimize the appearance of the gap by simply squeezing in some silicone caulk between the molding and the ceiling. Unfortunately, it may leave some excess caulk once you apply it. However, you can remedy this by taking a damp cloth and wiping away the excess (use mineral spirits with silicone caulk).

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

How Much To Install Kitchen Countertop?

Countertop installation costs $2,999 on average, with a typical range of $1,857 and $4,196. Homeowners usually pay $15 to $70 per square foot for the material and $10 to $30 per square foot for labor, for a total of $25 to $120 per square foot. Contents1 How much does Lowes charge to install laminate countertops?2 […]

Readers ask: How To Install A Moen Kitchen Faucet With A Sprayer?

Contents1 How do you remove a Moen faucet sprayer hose?2 Do you have to use plumbers putty when installing a new faucet?3 How do you change a Moen sprayer hose?4 Can I use silicone in place of plumbers putty?5 Do I need Teflon tape on faucet supply lines?6 Should you caulk around faucet?7 How do […]