How do you remove a Moen quick connect hose?
To disconnect a Duralock fitting, grasp the hoses on both sides of the fitting and push them together while you depress the black button on the fitting. When the button is fully depressed, it unlocks the connection so you can pull the hoses apart.
How do you remove a Moen kitchen faucet handle?
Some Moen faucets have handles that remove by loosening the screw in the back of the handle. To loosen this screw use a 3/32″ hex wrench. After the handle has been removed unscrew the spout collar nut by turning counterclockwise then lift and rotate the spout.
How do you tighten a Moen kitchen faucet under the sink?
Loosen and remove both supply lines by turning the nuts counterclockwise with the adjusted wrench. Slide a basin wrench up to one of the nuts holding the base to the sink. Turn the nut clockwise with the basin wrench until tight. Tighten the second faucet base nut.
How do you tighten a Moen kitchen faucet?
How Do I Tighten a Moen Kitchen Faucet Handle?
- Turn off the water.
- Check the handle.
- Remove the hex nut or screw.
- Under the cap.
- Tighten the screw.
- Reconnect the water supply.
How do you remove a Moen faucet handle without screws?
If you can’t have it out with your plain hands, try using a pair of pliers or faucet handle puller. Pliers can scratch your faucet’s handle if applied directly. Wrap an old cloth or towel around the handle’s base then use the pliers. After removing the handle, you may find some mineral deposits.
How do I find my Moen faucet model number?
Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).