Often asked: How To Install Recessed Lighting Under Kitchen Cabinets?

What kind of wire do you use for under-cabinet lighting?

Although wire size ultimately depends on your light-fixture manufacturer’s specifications, 12-gauge wire is standard for most incandescent and fluorescent under-cabinet fixtures. A basic installation requires a 12-2 NM cable.

Can you run Romex in cabinets?

The National Electrical Code requires that plastic-sheathed cable (commonly called Romex) be protected in areas where it’s subject to abuse. If you can run the plastic-sheathed cable high in the cabinets or behind drawers, you may not need conduit.

Do under cabinet lights go in front or back?

When mounting any fixture under a cabinet, position it to the front. If there is a lens, face it toward the backsplash. The bottom-front rail of the cabinet should hide the fixture from your line of sight, whether you’re standing or seated.

Where should under cabinet LED lights be placed?

If you want to install under cabinet lighting as task lighting, you should place the strip lights closer to the middle front edge of the cabinets, so the countertop will be exposed to as much light as possible. For ambient or accent lighting, you may want to place them closer to the back edge.

You might be interested:  Often asked: How To Install An Undermount Kitchen Blanco Sink In Granite?

What type of under cabinet lighting is best?

LED lighting is also the most energy efficient and long-lasting. Moreover, because it emits very little heat when on, it is perfect for use under kitchen cabinets, where food may be stored. Best of all, LED can produce a range of colors, from warm to cool.

Can Romex be exposed for under cabinet lighting?

Romex wire is designed for in-wall use and therefore is not designed to be seen. It is unsightly underneath cabinets when it is exposed. However, in most applications the light mounted toward the front of the cabinet is a much better option.

How do you hide under shelf lighting?

Another option is called the recessed floor option. This is done by raising the floor or bottom of the cabinet upwards so the cabinet door hangs past the bottom floor of the cabinet. This remaining area or void is perfect to conceal puck or LED strip under cabinet lighting when the cabinet door is closed.

Can I put a junction box in a cabinet?

Yes, it would be against code to have a cabinet cover the junction box. Anywhere you connect wires to wires, or wires to fixtures, the connection needs to be accessible. Since your cabinet would be permanently affixed to the wall and covering the junction box, it wouldn’t be allowed.

Can you put an outlet inside a cabinet?

If there isn’t any more space available on kitchen walls, or you want to avoid making holes in a finished wall that will require drywall repairs, you can install an outlet into a cabinet wall. You can also run conduit through your cabinets if necessary to avoid having to pass wires through the drywall.

You might be interested:  Quick Answer: How To Install A Kitchen Backsplash Over Drywall?

What is MC wire?

A Metal Clad Cable, also referred to as MC Cable, is a corrosion-resistant metal cable containing insulated copper or aluminum connectors.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

Readers ask: How To Install A Moen Kitchen Faucet With A Sprayer?

Contents1 How do you remove a Moen faucet sprayer hose?2 Do you have to use plumbers putty when installing a new faucet?3 How do you change a Moen sprayer hose?4 Can I use silicone in place of plumbers putty?5 Do I need Teflon tape on faucet supply lines?6 Should you caulk around faucet?7 How do […]

How To Install Kitchen Curtain Rods?

Contents1 Where should curtain rod brackets be placed?2 How far apart should curtain rod brackets be?3 Do curtain rods need studs?4 How high should you hang a curtain rod above the window?5 How much should a curtain pole overhang?6 How wide can a curtain rod be without support?7 How high should a curtain rod be […]