Often asked: How To Install The 1224 Moen Kitchen Facuact Cartridge?

What is the difference between Moen 1224 and 1224b?

Answer: The 1224 is packaged in retail packaging sold at retail stores. The 1224b is not in pretty retail packaging but just the cartridge only in a bag. All double handle faucets from Moen use the same cartridge.

How do I know what Moen cartridge to buy?

The easiest way to find the Moen shower valve replacement cartridge you need is to know the series or model number of your Moen bathroom faucet. Exact information for these comes with any paperwork you have received when you first installed the original shower faucet (hopefully you saved it).

What is the difference between Moen 1224 and 1248?

The 1248 is very slightly longer, and very slightly wider. You’ll also see a couple of notches at the valve opening (picture attached) that aren’t present on the 1224. It’s great fun, because the tool is metal and the retaining ring is plastic.

How do you remove a cartridge from a Moen faucet?

To remove the cartridge from your faucet assembly, first hold the handles steady and unscrew the handle hub counterclockwise. Once the handle hub is loosened completely, pull the handle off the valve assembly. Then, loosen and remove the nut from the cartridge using pliers.

You might be interested:  Question: How To Install Kitchen Islands?

Where is the model number on a Moen kitchen faucet?

Where do I find my faucet model number?

  1. The model number is printed on a tag that is attached to the cold water supply line of the faucet.
  2. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet.
  3. The model number, or part number, is typically preceded by “P/N.”

How do I identify my Moen kitchen faucet cartridge?

Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

Readers ask: How To Install A Moen Kitchen Faucet With A Sprayer?

Contents1 How do you remove a Moen faucet sprayer hose?2 Do you have to use plumbers putty when installing a new faucet?3 How do you change a Moen sprayer hose?4 Can I use silicone in place of plumbers putty?5 Do I need Teflon tape on faucet supply lines?6 Should you caulk around faucet?7 How do […]

How To Install Kitchen Curtain Rods?

Contents1 Where should curtain rod brackets be placed?2 How far apart should curtain rod brackets be?3 Do curtain rods need studs?4 How high should you hang a curtain rod above the window?5 How much should a curtain pole overhang?6 How wide can a curtain rod be without support?7 How high should a curtain rod be […]