- 1 Why do people put toe kicks on cabinets?
- 2 How high are toe kicks on kitchen cabinets?
- 3 How far back should a toe kick be?
- 4 Do you need a toe kick for kitchen cabinets?
- 5 Can you remove kitchen cabinet toe kick?
- 6 What color should toe kick be?
- 7 How much should a countertop overhang?
- 8 How wide should cabinet face frames be?
- 9 What is the typical depth of kitchen cabinets?
- 10 Should you caulk toe kick?
- 11 Can you glue toe kick?
- 12 Do you install toe kicks before or after flooring?
Why do people put toe kicks on cabinets?
The purpose of a toe kick is to create a recess for your feet, which allows you to stand closer to the countertop or workspace more comfortably. Toe kick molding is a long strip of flat covering that is positioned in the unfinished recess to provide a continuous finished look to the cabinetry.
How high are toe kicks on kitchen cabinets?
Below the base cabinet, there is a recessed area known as the toe kick. It typically measures 3 inches in height and the depth is approximately 3.5 – 4 inches. The toe kick is an ergonomic feature which places countertops and cabinets within arm’s length.
How far back should a toe kick be?
The Importance Of Toe Kick Dimensions The average toe kick height measures 3.5-inches and the average, as well as ideal, toe kick depth measures 3-inches.
Do you need a toe kick for kitchen cabinets?
The toe kick is an important part of any lower cabinet that you would spend time standing in front of. This includes kitchen cabinets and lower bathroom cabinets. Without a toe kick, you would have space all the way underneath, from the front of the cabinet to the wall. No one wants to clean spaces like that.
Can you remove kitchen cabinet toe kick?
Use a simple claw hammer and a pry bar to remove the toe kick. The space between the bottom of your cabinet doors and the floor is covered with a toe kick. Removing the toe kick from base cabinets is a relatively simple matter of prying the boards away from the cabinet.
What color should toe kick be?
In most kitchens the toe kick is either painted black or the same color as the cabinets, to make it as inconspicuous as possible.
How much should a countertop overhang?
Generally, the standard overhang of a countertop is 1 to 1 ½ inches from the cabinet, while the exposed ends of a countertop will usually have a ½ inch overhang, and the ends that meet a wall don’t have any overhang at all to keep the fit flush to the wall.
How wide should cabinet face frames be?
Face-frame stiles for cabinets are almost always 2 inches in width, reports Wood Magazine. Stiles that divide cabinets in the center are typically 2 inches in width, but some custom cabinet makers use 3-inch stiles throughout the cabinet. The width of any stile should be continuous throughout the cabinet.
What is the typical depth of kitchen cabinets?
Most commonly, wall cabinets are 12 inches deep, since this provides a good compromise between storage space in the kitchen cabinets and workable countertop space below the cabinet. Above microwave ovens, a 15- to 18-inch deep cabinet is common, and above a refrigerator, a 24-inch deep cabinet is standard.
Should you caulk toe kick?
No, you do not caulk, but generally you’d install a shoe molding around the cabinets.
Can you glue toe kick?
While most toe kick installation is best done with a cordless nail gun you can also tackle this job with construction adhesive and trim screws.
Do you install toe kicks before or after flooring?
Regardless of what you choose, the established standard for the top of the counter is about 36 inches above the floor. It’s also important to note that, if you’re including toe kick drawers in your kitchen design, put flooring down first to ensure that the bottom drawers can function properly.