- 1 Do you have to use plumbers putty when installing a new drain?
- 2 What size is a kitchen sink drain pipe?
- 3 Does kitchen sink need a vent?
- 4 How do you seal plastic to metal plumbing?
- 5 Can you use plastic pipe under sink?
- 6 Can I use a PVC P-trap with metal pipes?
- 7 Can you use plumbers putty on stainless steel?
- 8 What’s better plumbers putty or silicone?
- 9 Why use plumbers putty on sink drain?
- 10 How long can a sink drain pipe be?
- 11 What is the best pipe to use for drainage?
- 12 What is the rough in height for a kitchen sink drain?
Do you have to use plumbers putty when installing a new drain?
The putty will help the upper part of the drain assembly seal against the sink drain opening. If you do not have plumber’s putty or cannot use it on your type of sink, then you can use silicone or even the foam or rubber gasket that comes with some pop-up assemblies.
What size is a kitchen sink drain pipe?
All kitchen sinks today have the same diameter drain, which is 3 1/2 inches and is larger than a bathroom drain which measures in at 1 1/4 inches. It is the same size as a typical standard shower drain, however. When installing a new drain into the sink, you have no need to shop for certain diameter drains.
Does kitchen sink need a vent?
A plumbing fixture like a sink can not function properly without a sink vent. A sink needs a vent because the pressure put on the drain pipe when water flows down the drain pipe needs to equalize. The air needs to escape the drain pipe in order for the sink to vent.
How do you seal plastic to metal plumbing?
Joining Plastic and Metal Plumbing
- Get your materials. Joining plastic and metal plumbing will require that you use specific materials.
- Look at the pipes. Inspect the pipes, and check to make sure that they are in good working order.
- Use an adapter.
- Apply tape or compound.
- Apply PVC primer.
- Attach pipe and adapter.
Can you use plastic pipe under sink?
Most modern bathrooms contain plastic drain pipes made out of PVC, or polyvinyl chloride. This material transports nonpotable water down sink drains and other plumbing fixtures. Such pipes can be connected using threaded pieces or with glue.
Can I use a PVC P-trap with metal pipes?
These P-trap adapters easily adapt schedule 40 ABS or PVC, cast iron or steel pipes coming out of the wall or floor to tubular OD trap or tubing sizes. These adapters will fit both 1-1/2″ and 1-1/4″ tubular outside diameter trap pipe sizes, just in case you aren’t sure which size you have. Yes, they are that flexible!
Can you use plumbers putty on stainless steel?
It’s insurance that I guarantee will avoid future leaks. One word of caution is when setting a stainless steel sink or working on a stainless steel counter-top, use plumbers putty specifically designed for use with stainless steel.
What’s better plumbers putty or silicone?
Both plumber’s putty and silicone are sealing compounds designed to provide a water tight fit for pop up drains, sink strainers, undersides of fittings, showers and drains. Plumber’s putty is more traditional while silicone caulking is a more modern product, but either one (in most cases) can get the job done.
Why use plumbers putty on sink drain?
It is commonly used when installing bathroom sink drains, and provides a leak-proof seal that can last several years. Plumber’s putty stays soft for a long time, making it easy to remove the drain and make corrections, if necessary.
How long can a sink drain pipe be?
Maximum Distance According to the International Residential Code, the maximum vertical distance between the sink drain and the entrance to the p-trap is 24 inches.
What is the best pipe to use for drainage?
Polyvinyl Chloride pipes are the most commonly used pipes for any drainage project. Due to the material’s malleable properties, PVC pipes can come in almost any size. These types of pipes are great for drainage situations where the water and environment exert a great deal of pressure and weight.
What is the rough in height for a kitchen sink drain?
The rough-in height for the kitchen sink drain is between 20 and 24 inches. This varies depending on the height of the vanity or counter and the depth of your sink. The taller the vanity or more shallow the sink, the further from the ground your sink drain will be placed.