Question: Viedo How To Install Kitchen Aid Ice Machine?

Why isnt my Kitchenaid refrigerator making ice?

A common cause for when a KitchenAid ice maker won’t make ice is that the freezer temperature is too high. When the temperature is too high, ice cube production is deficient. Clean the condenser coils and check to ensure the condenser fan is working properly.

How do I fix my Kitchenaid ice maker?

HOW TO TROUBLESHOOT A KITCHENAID ICE MAKER

  1. If the freezer is plugged in but the ice maker is not functioning, check the on/off lever.
  2. Check if the water hose supplies the trays with enough water.
  3. Pinch the ice maker’s filling hose to check if it is frozen.
  4. Make certain that your freezer is set at 10 degrees Fahrenheit.

How do I disconnect my Kitchenaid ice maker?

Open the freezer door. Close the emitter door on the left wall of the freezer next to the ice maker, and open the ice maker door. Pull the door outward and to the left so the pin at the bottom disengages from the pivot hinge at the bottom. Lift out and remove the ice-maker door.

How do I uninstall an ice maker?

How to Remove an Ice Maker

  1. Unplug the refrigerator.
  2. Remove the container that holds the ice, as well as any plastic shelves.
  3. Remove the screws holding the ice maker in place.
  4. Disconnect the wiring harness that is hooked up to the ice maker.
  5. Disconnect the water line from the ice maker and pull the ice maker out.
You might be interested:  Question: How To Install Peel And Stick Kitchen Backsplash Over Tile?

How do you remove an automatic ice maker?

It’s called a fill bar or metal feeler arm. It’s generally found on the side of the ice maker in the up position. Gently lift the metal feeler arm to the up position to turn the unit off. You may hear a click sound when it locks into place.

How do you remove an ice maker from a freezer?

Lift the ice maker, so the ice maker brackets clear the screws and allow you to pull the ice maker from the wall. Disconnect the wire harness connected to the ice maker from the the freezer wall. Remove the ice maker from the freezer. Protect the wire harness connectors by wrapping them in electrical tape.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

Readers ask: How To Install A Moen Kitchen Faucet With A Sprayer?

Contents1 How do you remove a Moen faucet sprayer hose?2 Do you have to use plumbers putty when installing a new faucet?3 How do you change a Moen sprayer hose?4 Can I use silicone in place of plumbers putty?5 Do I need Teflon tape on faucet supply lines?6 Should you caulk around faucet?7 How do […]

How To Install Kitchen Curtain Rods?

Contents1 Where should curtain rod brackets be placed?2 How far apart should curtain rod brackets be?3 Do curtain rods need studs?4 How high should you hang a curtain rod above the window?5 How much should a curtain pole overhang?6 How wide can a curtain rod be without support?7 How high should a curtain rod be […]