Readers ask: How To Install Kitchen Hinch?

Where do you drill holes for Blum hinges?

To locate center of hinge cup on back side of door, measure over from edge of door 22.5mm (7/8 ). Here drill a 35mm (13¼8 ) diameter by 13mm (1/2 ) deep hole. 2. Insert hinge into 35mm (13¼8 ) hole and position hinge so that the arm is perpendicular to edge of door.

What is the boring distance for Blum hinges?

Blum recommends 3mm-6mm (1/8″-1/4″) boring distance for the 125 degree. They recommend 3mm-8mm (1/8″-5/16″) for the 170 degree hinge.

What is Blum mounting plate spacing?

Blum CLIP Cruciform Cabinet Mounting Plate – Screw On – 3mm Spacing – Pressed Steel – Pair.

What Blum hinge do I need?

There is a cabinet door hinge for every application. The 100 degree hinge is ideal for contract work. If full access is required, we recommend the 170 degree hinge.

What is the difference between soft close and self close hinges?

There is a difference in soft close and self close. Self close means when you close the door and it get within 2″ of closing, it will pull itself close because of the spring in the hinge itself. Soft close would be that the door gets about 2″ away from closing, and then slows itself to softly close.

You might be interested:  Quick Answer: How Much Should It Cost To Install An Old Style Kitchen Exhaust Fan?

Do you need two soft close hinges per door?

In general one soft hinge is sufficient on majority of the door and closing habits. However, if you close the door normally, or even with slightly harder manner than usual, one and two soft hinges would give you identical results.

Are soft close hinges worth it?

They lessen the stress on the hinges and hinge plates over the years. In turn, you will extend the life of your beautiful new kitchen cabinets. If you’re going to spend a little extra money on a new kitchen, adding soft close hinges is definitely something you should consider.

What is a flush hinge?

Flush hinges are usually hinges concealed within the inside of furniture or cabinets with opening doors. In accordance with its name, flush hinges can only be used on flush surfaces.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

Readers ask: How To Install A Moen Kitchen Faucet With A Sprayer?

Contents1 How do you remove a Moen faucet sprayer hose?2 Do you have to use plumbers putty when installing a new faucet?3 How do you change a Moen sprayer hose?4 Can I use silicone in place of plumbers putty?5 Do I need Teflon tape on faucet supply lines?6 Should you caulk around faucet?7 How do […]

How To Install Kitchen Curtain Rods?

Contents1 Where should curtain rod brackets be placed?2 How far apart should curtain rod brackets be?3 Do curtain rods need studs?4 How high should you hang a curtain rod above the window?5 How much should a curtain pole overhang?6 How wide can a curtain rod be without support?7 How high should a curtain rod be […]