Readers ask: How To Install Lights Under Kitchen Cabinets?

How do you wire under cabinet lighting?

Then, follow these steps for installation:

  1. Disconnect the power. Locate the correct breaker and turn off the power supply to the switch outlet where you’re going to connect the lights.
  2. Attach the lights.
  3. Cut the wall.
  4. Run the wire.
  5. Run the cord.
  6. Connect the lights.
  7. Wire the switch.
  8. Cover your work.

What kind of lights do you put under kitchen cabinets?

Popular Types of Under-Cabinet Lighting

  • LED Lighting. Light-emitting diode (LED) lighting is the most popular and most energy-efficient type of under-cabinet lighting.
  • Fluorescent Lighting.
  • Halogen Lighting.
  • Xenon Lighting.
  • Voltage.
  • Energy Efficiency and Heat Output.
  • Dimmers.
  • Ease of Installation.

Where should you mount under-cabinet lights?

When mounting any fixture under a cabinet, position it to the front. If there is a lens, face it toward the backsplash. The bottom-front rail of the cabinet should hide the fixture from your line of sight, whether you’re standing or seated. A plug-in fixture may be used for short runs of under-cabinet lighting.

How long do LED Under Cabinet lights last?

An excellent rated life for an LED under cabinet light is around 50,000 hours. Operated for 3 hours per day, that light could last over 45 years. Fluorescent lights usually last longer than xenon lights, but not as long as LEDs.

You might be interested:  Often asked: How To Install Laminate Double Kitchen Sink?

What is the best color for under cabinet lighting?

Best Color for Under Cabinet Lighting

  • 2700K is considered the same color as the classic incandescent light bulb.
  • 3000K is slightly bluer and is similar to halogen bulb light color, but still has a warm, inviting yellow color to it.

Is under counter lighting worth it?

Under cabinet lighting can actually save you money on your energy bill, and this is especially true if you opt for an LED light fixture. It has the potential to save money because you don’t have to illuminate the whole room just to get a little bit of light on the countertops below.

Can you run Romex in cabinets?

The National Electrical Code requires that plastic-sheathed cable (commonly called Romex) be protected in areas where it’s subject to abuse. If you can run the plastic-sheathed cable high in the cabinets or behind drawers, you may not need conduit.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

Readers ask: How To Install A Moen Kitchen Faucet With A Sprayer?

Contents1 How do you remove a Moen faucet sprayer hose?2 Do you have to use plumbers putty when installing a new faucet?3 How do you change a Moen sprayer hose?4 Can I use silicone in place of plumbers putty?5 Do I need Teflon tape on faucet supply lines?6 Should you caulk around faucet?7 How do […]

How To Install Kitchen Curtain Rods?

Contents1 Where should curtain rod brackets be placed?2 How far apart should curtain rod brackets be?3 Do curtain rods need studs?4 How high should you hang a curtain rod above the window?5 How much should a curtain pole overhang?6 How wide can a curtain rod be without support?7 How high should a curtain rod be […]